JoeDios.com Forums  

Go Back   JoeDios.com Forums > Discussion Forums > JoeDioes.com Forum > How-To
User Name
Password
Reply
 
Thread Tools Display Modes

Repairing Plastic
Old 02-26-2009, 06:38 PM #1
vader9900
To old to play with toys!
 
vader9900's Avatar
 
Offline
-->
Posts: 5,962
vader9900 is on a distinguished road -->
Join Date: Oct 2007
Default Repairing Plastic

Everyone reading this has had a broken part on a vehicle and tried to super glue it, only to have the broken parts stick to your fingers and not together. I have tried hot glue, epoxy, melting the parts together, nothing has worked! I purchased a Defiant Space Shuttle off ebay in a huge lot. UPS Dropped the box that the Defiant and Booster was in. The seller wrapped the entire thing in bubble wrap, but did not separate the Defiant from the Booster first. The weight of the Defiant made it smash through the top of the Booster at the latch and broke one of the supports in the rear. Here is the front latch damage:



That part holds the weight of the entire front end of the Defiant. The damage extends further:



The box was insured for $300, I have made a claim with UPS, we will see how that goes!
__________________

"It ain't about how hard you hit, but how hard you can get hit, how much you can take and keep moving forward - thats how winning is done!" Rocky Balboa

Last edited by vader9900 : 02-26-2009 at 06:48 PM.
  Reply With Quote

Old 02-26-2009, 06:47 PM #2
vader9900
To old to play with toys!
 
vader9900's Avatar
 
Offline
-->
Posts: 5,962
vader9900 is on a distinguished road -->
Join Date: Oct 2007
Default

At this point this is where I would try Super Glue, etc... and then start looking for a replacement Booster on ebay! I found this stuff at WalMart, it said it worked on plastics, I though - "Whatever!"



It works! It has been 24 hours and the repair is strong. The break was at a critical point because it hold the weight of the Defiant:



I plan on getting a piece of sheet styrene at the hobby store and reinforce the bottom of it for added stability. The Quick Grip will work nicely to bond it.

I highly recommend this stuff!! It was easy to work with, it dries clear, can be sanded & painted.
__________________

"It ain't about how hard you hit, but how hard you can get hit, how much you can take and keep moving forward - thats how winning is done!" Rocky Balboa
  Reply With Quote

Old 02-26-2009, 06:53 PM #3
Flatline
THEY ARE NOT DOLLS!!!
 
Flatline's Avatar
 
Offline
-->
Posts: 16,465
Flatline is on a distinguished road -->
Join Date: Jun 2007
Default

congradulations Dave Glad To See It Has Worked.
__________________
MY FLICKR PAGE......
  Reply With Quote

Old 02-27-2009, 05:55 AM #4
Bayer
Self-Important
 
Bayer's Avatar
 
Offline
-->
Posts: 1,034
Bayer is on a distinguished road -->
Join Date: Jan 2006
Default

Thanks for the recommendation. I've been having an issue with superglue lately as there are some plastics Hasbro has used lately that superglue will not adhere to. Whatever form of plastic the RHINO is made out of is an example. Even if you "rough up" the glue point, the glue will not adhere for very long and the glued part snap apart very quickly.

I'm glad you were able to make the repair. I'd have been heartsick if that box had come in and I found the ship busted up.

I wish I had known about this a year ago, my night raven might not have been scrapped and stripped for parts.

Oh well, it looks like I'm going to Wally-world for glue.
__________________
  Reply With Quote

Old 05-02-2009, 11:23 AM #5
Rambo
ARAH for O-ringers
 
Offline
-->
Posts: 6,074
Rambo is on a distinguished road -->
Join Date: Dec 2007

Send a message via MSN to Rambo
Default

Nice finding Vader and thx for sharing.
__________________



HEROES DON'T DIE, THEY JUST RELOAD
  Reply With Quote

Old 06-12-2009, 04:20 AM #6
rnrhero
I'm Really Cool.
 
rnrhero's Avatar
 
Offline
-->
Posts: 1,162
rnrhero is on a distinguished road -->
Join Date: Apr 2005
Default

I need t try this to fix a few parts on my Flagg. I should get some on the way home tonight. Thanks...
  Reply With Quote

thx
Old 06-02-2010, 10:54 PM #7
savage21
Veteran
 
savage21's Avatar
 
Offline
-->
Posts: 1,564
savage21 is on a distinguished road -->
Join Date: Apr 2010
Default thx

thank u for sharing god only knows im a clumsy clutz its nice to know there is a good product to fix up my toys
__________________
No Guts No Glory
  Reply With Quote

Old 04-02-2011, 07:32 AM #8
LT Shipwreck
Senior Member
 
LT Shipwreck's Avatar
 
Offline
-->
Posts: 184
LT Shipwreck is on a distinguished road -->
Join Date: Dec 2010
Default

Some information with regard to gluing plastics that I've learned through modeling over the years.

Styrene plastic: This is like the plastics that model airplanes, ships, trains are primarily made of. This is the type of plastic that EVERGREEN produces in sheets, angles, tubing, etc. This is a really nice plastic to work with because you can use "glues" that actually weld the pieces together.

My favourite is called TENAX 7R, but I've also used a product called AMBROID ProWeld. The unique features about these products is that that it is in a liquid form and you can use capillary action to get the glue in the right places. This is best applied with a fine paint brush.

Other types of plastics that can be glued with this type glue are Butyrate, ABS & Acrylic. Also you can glue plexiglass. (this will work on cockpit canopies).

Good ol' Testors model glue falls in this same category although it is much thicker and takes longer to set up. When glued properly these form a strong bond.

A word of caution when using these glues. Because the glue actually melts the plastic some distortion can occur if you glob it on!

CA glue (aka superglue) is great for gluing delicate pieces together but it isn't all that strong because the cyanoacrylate bonds to itself. Also when the chemical reaction is setting up it produces an off-gas which can discolour the surrounding plastic. Especially on painted surfaces!

A third type of glue for plastics is an epoxy, these typically come in two parts, a hardner and an epoxy. When mixed equally they set up quickly and are great for gluing resins.

So how does this all apply to gluing Joes back together?

It's been my experience that most of the ARAH vehicle shells are some form of Styrene or ABS plastic. (It looks like your shuttle body falls into this category.) However, many of the accessories are of some different type of plastic. My guess is that it is some form of polyethelene, which is used for a lot of food containers you buy at the supermarket. It appears to be of the same plastic family as milk jug caps. Has anyone every tried gluing a milk jug cap? Forgettaboutit! This stuff won't bond. And it's the same plastic Hasbro used on some of the following toys: FANG, skids and rotors, red engine cage; Dragonfly skids and wings; Tomahawk, turret gun, wings and stabilizers; Thundermachine,front axle, gun cage.

The only thing that I've found that will bond these types of plastic is CA. But it is not strong, so it is very delicate. For example I got a cherry FANG, but one side of the rotor blade was snapped off. CA is holding it back it place, but I know I have to give it the white glove treatment.

If anyone has found something that will actually bond this type plastic, cleanly, I would love to hear about it!

Happy Gluing and Yo Joe!
  Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




Powered by: vBulletin Version 3.0.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Style Design By: vBStyles.com


- JoeDios - Archive - Top