Assembly:

Pry apart the 25th Lady Jaye torso carefully. The area around the neck does not separate easily.

Take apart an Indiana Jones figure. Separate the jacket and the arms. The arms are difficult to remove and may require a lot of effort cutting to nearly the center of the figure.

Attach the arms to the opened Lady Jaye torso. Some adjustment to the arms may be required to make a tight fit into the torso’s arm sockets. Heat gun glue is useful for this.

Reassemble the figure’s torso, arms, and waist.

A 25th General Hawk upper legs and gun belt is needed. Combine the upper legs with the lower legs from a 25th Clutch.

The original recipe by Tunnel Rat at JoeCustoms made use of the Star Wars Juno Eclipse gloved hands. However the original Indiana Jones KOTCS hands were kept for my version of the recipe since the Juno Eclipse hands are smaller and would fit too loose, unless the heat gun method is used to secure the hands. However I felt in this case there would be maintenance issues with the hands over time.

The Juno Eclipse head is used. Some adjustment to the neck/head area will be needed to secure the head to the neck peg.

File down the gold wings on the Lady Jaye torso.

__________________
*~~~{==========- Death at Midnight -==========}~~~*