JoeDios.com Forums

JoeDios.com Forums (https://www.joedios.com/forum/index.php)
-   How-To (https://www.joedios.com/forum/forumdisplay.php?f=7)
-   -   Custom Cobra Chinook - CH-46 Sea Knight (https://www.joedios.com/forum/showthread.php?t=2432)

vader9900 04-08-2008 05:52 PM

Custom Cobra Chinook - CH-46 Sea Knight
 
I picked up this Chap Mei Chinook at TRU thanks to the praise of Flatline, Outrider & ender098. Everyone calls it a Chinook, but jjsvipers set us straight & let us know it is really a CH-46 Sea Knight. I like the sound of that - Sea Knight sounds like something Cobra would use. I do not normally use non-Hasbro/GI Joe vehicles, but this thing is huge, inexpensive, has great potential & Cobra needs a copter to match the Tomahawk. :eek:
I am not going to do any major mods to this thing, but to do what I needed to do I wanted smaller pieces to work with, so disassembly was step #1.

Taking it apart was simple, just remove all the screws, and there are alot of them. There are several different size screws & I made the mistake of not keeping them organized & just let them drop in my bucket as I removed them. This made reassembly a little more time consuming. :mad:
The next step was removing that huge horrible star off the side :rolleyes:

I used Testors paint thinner, lucky it worked very well & no acetone was needed. I used a Q-tip to remove the paint with small amounts of thinner at a time. The copter is molded in black, so the grey camo is paint & I did not want to remove that, so the Q-tip worked perfect for a controlled removal of the unwanted paint. After the paint was removed, I used a leather chamois, to shine the spot up. Now you can not tell there was ever anything there, and it shines like the rest of the vehicle. :)

vader9900 04-08-2008 06:03 PM

Next I painted all the small parts & trim of the copter. I have seen these in several different colors, mine was in maroon :confused:

Krylon Fusion for plastic, Satin Black - no sanding neccessary & it dries in 10 minutes, pay the extra money, it is worth it!
After the paint dried, it was time to detail the small parts. First the cockpit:

I use Model Master leather for the seats, gave it a black wash & them drybrushes tan for a well worn look. Painted the bolts silver, highlighted the buttons & fire extinguishers red. The gauges (hard to see at this angle) are painted white, with silver trim & red pointers. Weathering was done with silver & rust drybrushing. Everything was given a black wash, then sprayed with Testors Dull Coat.
Then the rest of the small parts:

Same thing - silver & rust drybrush, black wash & Dull Coat

vader9900 04-08-2008 06:09 PM

I wanted some bullet holes, I use a hand drill, then paint the hole silver

More detailing:

I have seen some people dispose of the hook, but it is too cool!!!! :D You pull it out & it ratchets its way back up, add the cargo net & it is one cool accessory. It just needs a little help:

vader9900 04-08-2008 06:14 PM

Rotor detail

Rear cargo door

Reassembled


This is a work in progress, I am by no means done with it! I still have LOTS of weathering & maybe some more bullet holes to add to the body. I just wanted to share with you what I have done so far! :) Thanks for looking, check it out soon in the photo section. Dave

Flatline 04-08-2008 06:23 PM

Daaaaaaaam!!
 
:eek: WOW DAVE YOU DID A HELL OF A BETTER JOB THEN I DID ON MINE. I MAY HAVE TO TRY MY HAND AT IT AGAIN. TRUELY GREAT WORK VADER. ;)

vader9900 04-08-2008 06:31 PM

Quote:
Originally Posted by Flatline
:eek: WOW DAVE YOU DID A HELL OF A BETTER JOB THEN I DID ON MINE. I MAY HAVE TO TRY MY HAND AT IT AGAIN. TRUELY GREAT WORK VADER. ;)

Thanks Marcos.
One thing about this copter, it is way under gunned, it only has the single front gun. A real Sea Knight has a .50 cal door gun, mine will too very soon! :D

Bayer 04-08-2008 06:44 PM

I love your detailing. The paint scheme is great. I cannot say enough great things about your job. The bullet scars are a great detail.

Flatline 04-08-2008 06:46 PM

Quote:
Originally Posted by vader9900
it is under gunned, it only has the single front gun. A real Sea Knight has a .50 cal door gun, mine will too very soon! :D


SA-WEEEET ;) I CANT WAIT TO SEE THAT AND SOME PHOTOS OF IT IN ACTION

Urban Saboteur 04-09-2008 04:47 PM

Nice work!
 
Nice work Vader, I'd agree with your assessment, considering what the T-hawk has at it's disposal for armaments you'll need another gun on it somewhere. :D

Very cool work so far though V. Good stuff and thanks as always for sharing.

yorktownjoe 04-10-2008 03:55 PM

Quote:
Originally Posted by Bayer
I love your detailing. The paint scheme is great. I cannot say enough great things about your job. The bullet scars are a great detail.


Agreed! This is a fine customization that lets us see the potential of what a good paint job can do!

ToneGunsRevisited 04-20-2008 09:01 AM

I really liked the inside of the cockpit.

vader9900 05-18-2008 06:50 PM

This bad boy is going up for sale to help pay my medical expenses, I will offer it up here before I list it on ebay. If you want it make me an offer. Thanks, Dave

Rambo 05-18-2008 07:40 PM

How much are you asking for it?

vader9900 05-18-2008 07:55 PM

I will take the best offer.

justinm 06-01-2008 08:38 PM

I love It!

justinm 06-07-2008 09:23 PM

does anyone have one of these I can buy(original, Ill save all the custom work to me! :eek: :D )

Flatline 06-07-2008 10:58 PM

Quote:
Originally Posted by justinm
does anyone have one of these I can buy(original, Ill save all the custom work to me! :eek: :D )

CHECK YOUR LOCAL TOYS R US BUDDY ;)

justinm 06-07-2008 11:21 PM

Quote:
Originally Posted by Flatline
CHECK YOUR LOCAL TOYS R US BUDDY ;)

Mine don't have any. The last time i saw them was 3 years ago(i bought but it is missing most of the pieces from when i used to play with joes) :mad:

Flatline 06-07-2008 11:47 PM

Quote:
Originally Posted by justinm
Mine don't have any. The last time i saw them was 3 years ago(i bought but it is missing most of the pieces from when i used to play with joes) :mad:

I'LL KEEP MY EYE OUT AND PM YOU LIL GUY. ;)

justinm 06-08-2008 12:02 AM

Quote:
Originally Posted by Flatline
I'LL KEEP MY EYE OUT AND PM YOU LIL GUY. ;)

THANK YOU VERY MUCH,HIGHLY APPRIECIATED. I can pay however needed(items or cash)


All times are GMT -7. The time now is 10:03 PM.

Powered by: vBulletin Version 3.0.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.