JoeDios.com Forums

JoeDios.com Forums (http://www.joedios.com/forum/index.php)
-   How-To (http://www.joedios.com/forum/forumdisplay.php?f=7)
-   -   pallet 2.0 (http://www.joedios.com/forum/showthread.php?t=3589)

blackblast 07-22-2009 04:56 PM

pallet 2.0 a easy making of
 
3 Attachment(s)
First you must buy small sticks for models of 6X2 mm or 8X2 mm and of 5X5, also you must cut every 6,5 cm

blackblast 07-22-2009 05:02 PM

parte II
 
4 Attachment(s)
Then you divide in groups
8 of 2X8 and 3 of 5X5
or also
9 of 2X6 and 3 of 5X5
and are sticking them like it appears in the images

blackblast 07-22-2009 05:06 PM

parte III
 
3 Attachment(s)
You wait that it dries and then you roll over.
You leave three for below and the rest overhead, equidistant to the eye

blackblast 07-22-2009 05:09 PM

parte IV
 
2 Attachment(s)
Now you compress them with a few heavy books and wait...

blackblast 07-22-2009 05:16 PM

parte V
 
3 Attachment(s)
Already almost we end, now lets go for the nails
1.-paints with a black pencil to ink, very thin a couple of points like it they show the images.
2.-Then you paint with a pencil gel silvered on the black points.

blackblast 07-22-2009 05:19 PM

parte VI final
 
2 Attachment(s)
Finally we have the pallet ready for our load.
I hope that it be useful for you.

blackblast 07-22-2009 05:38 PM

bonus
 
3 Attachment(s)
A few images with figures

Sonneilon 07-23-2009 01:45 PM

Hey, thanks man. Never thought of putting up a how-to on this tho I know how to.

Now to create your own beds, that'd I'd like to see!

blackblast 07-24-2009 11:24 AM

Quote:
Originally Posted by Sonneilon
Hey, thanks man. Never thought of putting up a how-to on this tho I know how to.

Now to create your own beds, that'd I'd like to see!


i was thinking of doing a how to on a house of wood (slightly easy and rapid), but also it might be about how to do a bed. sommething like a bed factory XD


All times are GMT -7. The time now is 11:12 AM.

Powered by: vBulletin Version 3.0.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.