JoeDios.com Forums  

Go Back   JoeDios.com Forums > Discussion Forums > JoeDioes.com Forum > How-To
User Name
Password
Reply
 
Thread Tools Display Modes

Simple brick or block wall
Old 12-13-2008, 08:11 AM #1
vader9900
To old to play with toys!
 
vader9900's Avatar
 
Offline
-->
Posts: 5,962
vader9900 is on a distinguished road -->
Join Date: Oct 2007
Default Simple brick or block wall

This is a how-to on building a simple but effective block or brick wall as seen HERE.
I am going to build a small sample wall here for reference, the one I used in my picture is 16" wide & 12" tall. The wall is simply foam core, I use the black type because it takes paint better than the white. It is easy to find, available at WalMart. The first thing you want to do is sand the side you are going to be working on. This will give you a little texture to your blocks.



Next we are going to draw out our blocks. I know some of you are artist and can do this freehand, I am not, so I use a pencil & a ruler. First the rows:



I am going to make 1" x 1/2" blocks, so the rows are marked every 1/2" down the foam core. I then mark each block at 1" intervals across alternating every other row by 1/2" to offset your blocks



Every other row offset by 1/2

__________________

"It ain't about how hard you hit, but how hard you can get hit, how much you can take and keep moving forward - thats how winning is done!" Rocky Balboa
  Reply With Quote

Old 12-13-2008, 08:26 AM #2
vader9900
To old to play with toys!
 
vader9900's Avatar
 
Offline
-->
Posts: 5,962
vader9900 is on a distinguished road -->
Join Date: Oct 2007
Default

After you have your blocks drawn out, its time to emboss the blocks into the foam core. I used a wooden stylus, it is for sculpting with clay, I think I got it at Michaels. Any tool with a blunt tip will work.



You don't want the tool to be sharp because you do not want to puncture the outer paper of the foam core (notice I did in the bottom left corner below). A ball point pen will work well too. Take your stylus and rub back and forth over your lines to make a indentation in the paper of the foam core. Make it as deep as you can without puncturing the paper.



Then round all the corners of your bricks



Add some character - put as much or as little detail into it as you like.

__________________

"It ain't about how hard you hit, but how hard you can get hit, how much you can take and keep moving forward - thats how winning is done!" Rocky Balboa

Last edited by vader9900 : 12-13-2008 at 08:53 AM.
  Reply With Quote

Old 12-13-2008, 08:32 AM #3
vader9900
To old to play with toys!
 
vader9900's Avatar
 
Offline
-->
Posts: 5,962
vader9900 is on a distinguished road -->
Join Date: Oct 2007
Default

Time to paint. First coat will be a heavy drybrush. I use all Testors acrylic paints. The base is Battle Ship Grey, but any dark grey will work.



Foam core will warp when it gets wet and allowed to air dry, acrylic paints are water based. I use a heat gun (a hair dryer will work too). It speeds up the drying time & it prevents warping. Next layer is a heavy black wash (25% black paint to 75% water)



Make sure your wash gets down in your embossed cracks & crevases. Again use your heat gun. Make sure the wash is completely dry before proceeding. Then a light drybrush of olive drab.



Then a very light drybrush of light grey



Thin out your black wash by 50% and give it another light coat, there again getting it in all the cracks. I sprayed mine down with Testors Dull Coat to seal the paint and to minimize reflection. Add figures & photograph!



Hope this helps! It actually took more time to write up this how-to than it did to make the wall. Dave
__________________

"It ain't about how hard you hit, but how hard you can get hit, how much you can take and keep moving forward - thats how winning is done!" Rocky Balboa

Last edited by vader9900 : 12-13-2008 at 08:47 AM.
  Reply With Quote

Old 12-13-2008, 10:47 AM #4
Sgt_DP
The Man Behind the Camera
 
Sgt_DP's Avatar
 
Offline
-->
Posts: 632
Sgt_DP is on a distinguished road -->
Join Date: Aug 2005
Default

That is very cool and simple to do. Thanks for the "How to". That looks great. To think how much I spent on some coble stone and other bricks that looked no where near as good as this...
  Reply With Quote

Old 12-13-2008, 03:15 PM #5
Tracker
Veteran
 
Tracker's Avatar
 
Offline
-->
Posts: 8,288
Tracker is on a distinguished road -->
Join Date: Feb 2008
Default

That is very effective yet simple. Thanks
  Reply With Quote

Old 12-13-2008, 09:17 PM #6
Rambo
ARAH for O-ringers
 
Offline
-->
Posts: 6,074
Rambo is on a distinguished road -->
Join Date: Dec 2007

Send a message via MSN to Rambo
Thumbs up

You're an artist. PERIOD.
__________________



HEROES DON'T DIE, THEY JUST RELOAD
  Reply With Quote

Old 12-14-2008, 08:31 PM #7
vespapilot79
Veteran
 
vespapilot79's Avatar
 
Offline
-->
Posts: 665
vespapilot79 is on a distinguished road -->
Join Date: Aug 2008

Send a message via Yahoo to vespapilot79
Default

Great work!!Well worth the time to get an awesome result as yours!!
__________________
"If it doesnt have a fire coming out the ass end, it isnt worth flying"
  Reply With Quote

Old 12-15-2008, 12:15 PM #8
Jaybird
Veteran
 
Jaybird's Avatar
 
Offline
-->
Posts: 169
Jaybird is on a distinguished road -->
Join Date: Aug 2008
Default

Thanks for the great instructions. I'm definitely going to have to try this!
  Reply With Quote

Old 12-15-2008, 01:03 PM #9
Flatline
THEY ARE NOT DOLLS!!!
 
Flatline's Avatar
 
Offline
-->
Posts: 16,465
Flatline is on a distinguished road -->
Join Date: Jun 2007
Default

thanks Dave
__________________
MY FLICKR PAGE......
  Reply With Quote

Old 12-15-2008, 09:00 PM #10
4-Cobra
OUTRIDER,Always Remember.
 
4-Cobra's Avatar
 
Offline
-->
Posts: 590
4-Cobra is on a distinguished road -->
Join Date: May 2008
Default

Thank's for another great "How To",i'll be giving this a try.I've already tried out your Tree Building & Bush Building How To's,and with your help I think my Tree's came out great.I'm also building a Home Made Lighting Box from seeing the one you have,and when I get it finished i'm going to start posting Pic's.So Thank's for the Help...
  Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




Powered by: vBulletin Version 3.0.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Style Design By: vBStyles.com


- JoeDios - Archive - Top